Easy DIY Grave Yard

[Bruce Tackett]

I cut 3 even lengths of 1" PVC from a 10' pipe, 3'4" each. On each pipe I drilled a hole 2" down from one end for a 1/4" hexhead screw. I made a mark 2'8" down from the screw end. I made 2 45 degree cuts on the other end.



Using a hand mall, I drove each pipe, sharpened end down, into the ground up to the 2'8" mark. I spaced each pipe at 4' intervals. I then placed a cap on each pipe and spray painted them. When the paint had dried, I added the plastic chain I had gotten from a hardware store. I made a mark on links that are 5' apart and placed those links over the 1/4" hexhead screws. I then glued gargoyles to the tops of each cap using Goop. I had gotten two packs of 5 each gargoyles from Amazon. Notice the black cat stretched out at the top of he pic. That is my Cocobean.

[Mr. Pierini Fitness]

Nice job Bruce but you need one a little larger because I believe you have more girth than what you've designed.  Unless you're going in sideways.

[Deuce Gunner]

What kind of candy you giving away this year?

[Dave Reslo]

This could be ideal for those of us looking to pay our respects to Sierra Exercise Equipment LLC on the cheap